Residential · Durham, NC
When your screen mesh is torn, loose, or sun-brittle, it only takes one gap for mosquitoes and pollen to get inside. Durham Screens has served Durham since 2018, replacing screen mesh on porch panels, windows, doors, and pool enclosures with clean edges and tight, even tension.
We start by measuring each opening and confirming frame condition before we touch the mesh. Old spline is pulled, the screen track is cleaned, and we check corners for warping, bent rails, or stripped screw holes that can prevent a tight fit. Then we cut new screen mesh with proper overlap, set it in the channel, and roll in fresh spline using a screen roller so the material locks evenly without ripples or “smiles.” If the frame is damaged, we’ll flag it early so you do not pay for a re-screen that will fail again.
North Carolina heat, UV, and humidity are hard on screen mesh, especially on west-facing openings and high-use doors. We help you choose the right material for the job: standard fiberglass for most porch and window panels, stiffer aluminum where you want extra rigidity, pet-resistant vinyl-coated polyester for claws and heavy traffic, and no-see-um mesh when biting gnats are the issue. For more airflow and visibility, we can use larger-open weave products where privacy and insect pressure allow. Final tension and spline size are matched to the frame so the screen sits flat, clears the latch side, and does not pop out when doors slam.
Durham property owners choose us because we treat screen mesh replacement like finish work, not a quick patch. You get a straightforward written scope, material options explained in plain terms, and neat workmanship that protects your frames, paint, and hardware. Our installers use the correct spline diameter, keep corners square, and avoid over-tensioning that distorts thin aluminum frames. We are licensed and insured, show up on schedule, and communicate clearly if we find rotted wood stops, loose glazing, or frame damage that affects the result.
Before we wrap up, we walk the job with you and check every panel for tightness, smooth edges, and a consistent bead of spline seated below the surface. We verify doors close cleanly, magnetic catches meet, and there are no gaps at corners or along the kick area. You get new screen mesh installed to fit, trimmed clean, and ready for daily use, plus care tips to extend life (gentle washing, avoid pressure-washer tips at the mesh, and keep pets from climbing). If you need multiple panels done, we can stage the work to keep your porch or entry usable while we replace screens.
Yes. We provide a free written estimate after reviewing the site and confirming materials, openings, and hardware needs.
Yes. Durham Screens is licensed and insured for screening work, and we can confirm details during scheduling.
In most cases, yes. We can typically match common mesh colors like charcoal or gray and coordinate frame components, spline, and hardware to blend with existing assemblies.
Small repairs can often be completed in a single visit. Larger rescreening and porch projects vary by scope, number of openings, and any needed frame or carpentry repairs.
Yes. We troubleshoot sagging doors, misaligned hinges, worn closers, latches, and sweeps, then repair or replace the hardware and rescreen as needed.
Screen mesh is a wear item. Sun, wind-driven rain, pets, kids, and daily door use can stretch it, tear it, or pull it out of the track. Durham Screens replaces screen mesh on porches, screened-in patios, window screens, screen doors, sliding doors, and pool enclosures using the right mesh type, spline size, and tensioning method for each frame. The goal is simple: a flat, tight screen that blocks insects, improves comfort, and holds up season after season.
Choosing screen mesh is not one-size-fits-all. Fiberglass is the most common for window screens and porch panels because it installs cleanly and resists denting. Aluminum mesh adds stiffness and can be a good fit for certain frames, but it can crease if impacted. Pet-resistant mesh uses heavier yarns and a vinyl coating for higher tear resistance on screen doors and low panels. If tiny insects are your problem, no-see-um mesh uses a tighter weave, with a tradeoff of slightly reduced airflow and visibility.
A quality screen mesh replacement depends on the details you do not see when it is finished. We remove the old material, clean the frame channel, and install new spline that matches the depth and width of the groove. Using a screen roller, we seat the mesh evenly to avoid waves, weak corners, and pull-outs. We also check for common failure points, like warped frames, loose corners, and worn door hardware that causes slamming and repeated screen damage.
If you want screen mesh that looks neat and stays put, we can quote the exact openings, recommend the right mesh for your use, and complete the install with a clean, finished edge. Tell us what you are screening (bugs, pollen, pets, or pool debris) and we will build the right solution around that need.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Durham. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
